What We Can All Do ?

Saving the rainforests and environment is not an easy task. It took many years of neglect, mainly on our part, in keeping the environment clean. We polluted our air and our water through chemicals and different types of bacteria and debris. We used paper products that were not recyclable and or were not biodegradable.

Rome wasn’t built in a day as the old cliche states, but we managed to ruin our planet over the years and unfortunately it will take longer than a day to rid the Earth of all the garbage we have dumped on it. It is so easy to throw a piece of paper out of your car window, instead of finding a receptacle to dispose of it, or to throw empty cans in with your regular garbage instead of separating them for the recycle pickup or to bring bottles back to the store. Let’s not forget the broken down refrigerators, t.v.s, mattresses, etc on the side of the road.

I have traveled to third world countries and it breaks my heart to see that. They have no means of garbage disposal and they certainly don’t know how to recycle. Most of the people, although poor, take pride and keep their properties neat and debris free, others do not care. The same goes for people who live here on Earth. Some are proud of what they own and others could care less.

By the inch it’s a cinch, by the yard it’s hard. If we all do our part in what ever little way, we can help improve Mother Earth and make it liveable for generations to come. Let’s start by picking up our litter, don’t let the water run when brushing your teeth, use rags instead of paper towels, carpool if you can, don’t discard items on the side of the road to make it look unsightly, but for the most part…. Be Proud Of Where You Live and What You Have!!!!!!

“Nothing Leaves An Impression Like A Lasting One”….

http://www.impressionsbyjackie.com

Clean Green Engine Fox News

Noise and Vibration Control Goes to the Animals

Noise and vibration control is an issue that is much more common than one might originally think. In fact, it can creep up in the most unlikely of places. A good case in point is animal lab environments. Indeed, ALN Magazine recently ran an article titled “Noise & Vibration Considerations for the Animal Lab Environment.” Therein, the publication pointed out, “In the lab animal facility setting, noise, sound, and vibration affect the life cycle, interaction, and behavior of animals.” However, because “the impact of noise, sound, and vibration is a largely undocumented factor in the research,” it’s an often overlooked issue.

“If the sound pressure levels get too high,” the article continues, “there is a negative impact on animals and structures.” Vibration control, however, is just as important to these animals as noise control in that it “is a driving force behind radiated sound.”

Obviously, exposure to noise and vibration can be detrimental to an animal’s hearing, but the risks don’t stop there. “Sound and vibration can [also] have a physical impact on animals.” Even more startling, “Smaller animals are more susceptible to the affects of sound and vibration over time and will adapt or adjust accordingly. In some cases, mutations may result from exposure to undesirable conditions.”

How can animal laboratories mitigate these problems? The magazine notes, “The designers can control items that are constant disturbances that may greatly impact the animal community. Items within the designer’s control include ventilation system design, machinery vibration isolation, wall construction, lighting selection, and computer terminal placement.”

During the design process, animal labs may want to consult with a producer of custom-molded rubber and rubber-to-metal bonded parts for noise and vibration control. A world leader in the creation of rubber molding and rubber-to-metal bonded parts can help to create an environment that is not only safe for the animals being kept there but is also conducive to a healthy work environment for the people who are employed there.

The Vibro-Insulator line of isolators and mounts, in particular, aid in the control of noise, vibration, and shock. Selecting the right type of mount for an individual animal lab’s specific applications can prove tricky, however. That’s why consultation with an expert with reputable qualifications in rubber molding and rubber-to-metal bonding can be very beneficial.

Of course, once professional advice has been obtained, browsing the Vibro-Insulator catalog allows animal labs easy navigation so they can select the correct mount for their application. Rubber Vibro-Insulators come in a variety of styles and sizes to handle most vibration isolation problems. Most of the mount styles are designed to be used in either the compression or shear direction.
Selection of the proper Vibro-Insulator for a specific application boils down to a multi-step mathematical function that an expert can calculate for the lab or into which the lab’s design team can plug the following information:

1. The maximum load that must be supported.
2. The number of mounts supporting the load.
3. The frequency of the disturbing vibration.
4. Any restrictions on the size or style of the mount based on space limitations or assembly considerations.

Carmen Fontana is a Web Services Manager for Western Reserve Internet Services. Karman Rubber is a world leader in vibration control.

Green's Meets

Christians and Earth Day

Earth day is coming soon (4/22/09). This month we have Easter as well…so it got me thinking. How should Christians respond to Earth day?

First, I think we need to keep it all in perspective. Yes, we are to be good stewards of the planet. However, we are not to be earth “worshipers.” The earth is just another thing in our lives that God wants us to be a good steward with. Yes, it is important…However, Jesus Christ and His shed Blood is much more important. Saving souls should be above saving polar bears. You know what I mean?

So, do I think Christian’s should celebrate Earth Day?

Sure. Just make sure you have this whole eco, green planet stuff in perspective. Make sure that you are lined up with the Word and that God is your priority and His will. Do not let being green override sharing the Love of Christ and your true God-given purpose.

All that said, I thought it would be cool to add some fun stuff to do for earth day…

Earth Day Activities:

Plant a tree. This could be a fun family project.

Recycle. Take those cans you have been saving and turn them in.

Make the whole day green. Make eco choices all day long.

Clean up. Take your family to the park and clean up the junk left by others.

Make a point to add more green. Add at least one more green activity to your life.

Go on a nature walk. Enjoy the beautiful environment that God created for you.

Organic. Visit your local Ma and Pa farmer and shop for some earth friendly stuff.

Copyright © Green Christian Network, All Rights Reserved

About the Author: Cindy Taylor is a Christian stay at home Mom who love the Lord and cares about God’s planet. You can see her passion and writing at her website, Green Christian Network (http://greenchristiannetwork.com).

First Solar's Utility Contracts Pass Production Capacity | BNET …

BNET Industries gives managers and executives comprehensive daily industry trends and news for the major sectors of business. The advertising, automotive, energy, financial services, food, health care, media, pharmaceutical, retail, …

First Solar Scores Yet Another Cali Utility Deal: 550 MW for SCE

The thin film solar outfit that has signed up utility deals in spades has scored yet another big one. This …

Solar Power and the FLAP Bag Project

My obsession with portable solar energy continues — in the past I’ve written about Suntrica’s portable chargers, Reware’s Juice Bags …

Inhabitat » Solar Sunflower Field Energizes Austin, Texas

A Green Design Blog, Sustainable Design Blog, Future-forward design for the world you inhabit – your daily source for innovations in sustainable architecture and green design for the home.

Solar power brings light to Bangladesh villages – COP15 United …

With state-owned and private sector fossil-fuel power plants only capable of delivering up to 3800 megawatts of electricity a day against a demand of 5500 megawatts, solar energy systems offer some relief to millions of villagers in …

Recycling Helps Prevent Global Warming – How to Keep the Environment Clean

If you want to keep the environment clean then you need to recycle everything you can. You should set aside a few spaces so that you can keep your recyclables in a separate area. All of your water bottles should go into one container so that it will make it easier for you to take them to the recycling center. Also you need to make sure that you recycle all of your chance and glass bottles as well because this will also help the environment. Many people do not know that you can also recycle your old newspaper, you can call to have it picked up each month.

If we are going to prevent global warming than one way that you can take part is to recycle everything you use. the best thing you can do is educate yourself on the best way that you can recycle all of your throwaway items. Maybe some of your old clothes can be donated to Goodwill this way they can be recycled and used again. Make sure that you try to avoid using plastic bags from the grocery store because once they end up in a landfill they can cause a lot of problems. Once you have started a recycle program in your house you will find that it is easy to do.

Remember that if you want to improve the environment you need to recycle everything you can. It always works better if you have specific containers that you use for each of your recyclable items. Once you make a few small steps towards improving the environment you will feel better about yourself.

Get Free: Recycling Advice

Save with: Great Recycling Tips

Bryan Burbank is an expert in the field of Environmental Issues and Going Green

Solar power brings light to Bangladesh villages – COP15 United …

With state-owned and private sector fossil-fuel power plants only capable of delivering up to 3800 megawatts of electricity a day against a demand of 5500 megawatts, solar energy systems offer some relief to millions of villagers in …

First Solar Scores Yet Another Cali Utility Deal: 550 MW for SCE

The thin film solar outfit that has signed up utility deals in spades has scored yet another big one. This …

Kenya's Safaricom launches solar phone

Kenya’s largest mobile operator Safaricom has introduced the solar-charged mobile phone called Simu ya Solar, developed by ZTE and Intivation. The.

Solar Bus Shelters Debut | Planetizen

“Taking its cue from the shape of seismic shock waves, the canopy is made of recycled, 40 percent post-industrial polycarbonate, with a ribbon of solar cells running down its center. The photovoltaic (PV) material supplies power to a …

First Solar, SCE sign PPA for 550 MW solar projects | Cleantech Group

Thin-film giant and Southern California utility team up on two solar projects expected to produce 1.2 billion kWh of clean energy annually.

Cleanliness Analysis

You cannot control that which you do not measure.

In more and more industries, the exact knowledge of particle contamination is gaining in importance. Contamination of materials in dimensions of a few micrometers was mainly of concern for the pharmaceutical and semiconductor industries. However, not only manufacturers of circuit board components, but also traditional car parts suppliers face new demands on particle recognition and contamination source identification.

Cleanliness for the automotive parts manufacturers has become a huge topic in today’s ever challenging continuous improvement world. The need to define, measure and control the levels of particulate contamination on product is the new norm for suppliers and automotive OEM’s.

Cleanliness directly relates to product warranties, reliability, performance and safety issues. It has long been known that a dirty product gives us poor quality and low life expectancy. The dirtier the transmission from new, the less time it will last.

It is crucial now to identify particles and their source so that effective elimination can be achieved. Residual contamination consists of particles that persist on the component’s surface after the final step in manufacturing. Such contaminants are introduced via parts from suppliers or arise during processing. After vehicle assembly, the contaminant particles can cause severe damage, loss of function or reduce the lifetime of the product.

Cleanliness is defined as the contamination level of a component surface. Common measures to quantify the cleanliness are mass of the contaminants as well as number, size of the dirt particles. In general, the customer will specify contamination limits. The supplier then has to maintain these levels and document them regularly by means of contamination analysis.

The analysis of the contamination has to be proven to not affect the result and to be effective in evaluating all the contamination present. Methods of extraction and evaluation are specified in the international standard ISO 16232. Particular attention must be paid to the extraction method to ensure no contributing factors are introduced to the evaluation. There are different methods of counting the resulting extracted particles but by far the most accurate, repeatable and cost effective is automated microscope analysis. The microscope with software can scan the filter membrane; sort the particles by size class and even determine basic material composition (metal, non-metal, fiber). Once the data is gathered a custom report can be generated based on the customer requirements.

For more information on cleanliness analysis, visit http://www.onclean.com

Chris Trower is the President of Onclean Labs Inc, an Ontario based lab specializing in third party cleanliness analysis testing.

News of Online -G.1440

Analysis for Cleanliness

You cannot control that which you do not measure.

In more and more industries, the exact knowledge of particle contamination is gaining in importance. Contamination of materials in dimensions of a few micrometers was mainly of concern for the pharmaceutical and semiconductor industries. However, not only manufacturers of circuit board components, but also traditional car parts suppliers face new demands on particle recognition and contamination source identification.

Cleanliness for the automotive parts manufacturers has become a huge topic in today’s ever challenging continuous improvement world. The need to define, measure and control the levels of particulate contamination on product is the new norm for suppliers and automotive OEM’s.

Cleanliness directly relates to product warranties, reliability, performance and safety issues. It has long been known that a dirty product gives us poor quality and low life expectancy. The dirtier the transmission from new, the less time it will last.

It is crucial now to identify particles and their source so that effective elimination can be achieved. Residual contamination consists of particles that persist on the component’s surface after the final step in manufacturing. Such contaminants are introduced via parts from suppliers or arise during processing. After vehicle assembly, the contaminant particles can cause severe damage, loss of function or reduce the lifetime of the product.

Cleanliness is defined as the contamination level of a component surface. Common measures to quantify the cleanliness are mass of the contaminants as well as number, size of the dirt particles. In general, the customer will specify contamination limits. The supplier then has to maintain these levels and document them regularly by means of contamination analysis.

The analysis of the contamination has to be proven to not affect the result and to be effective in evaluating all the contamination present. Methods of extraction and evaluation are specified in the international standard ISO 16232. Particular attention must be paid to the extraction method to ensure no contributing factors are introduced to the evaluation. There are different methods of counting the resulting extracted particles but by far the most accurate, repeatable and cost effective is automated microscope analysis. The microscope with software can scan the filter membrane; sort the particles by size class and even determine basic material composition (metal, non-metal, fiber). Once the data is gathered a custom report can be generated based on the customer requirements.

For more information on cleanliness analysis, visit http://www.onclean.com

Chris Trower is the President of Onclean Labs Inc, an Ontario based lab specializing in third party cleanliness analysis testing.

10 Tips Of Green At Home

Mark Twain's hard lesson for solar energy investors – SmartPlanet

The Thinking Tech blog focuses on technologies such as virtualization, smart electric grids, enterprise 2.0, open source, data center management, green technology and the intersection between the innovation and application of these …

Solar Industry Investments Booming in Malaysia | Solar Energy …

solar energy stocks, solar power stocks, photovoltaic power.

Tech Trader Daily – Barron's Online : Solar: More Trouble Looms …

The troubles for the solar sector are far from over, Barclays Capital analyst Vishal Shah warned this morning. Formerly bullish on the group as a whole, Shah today reduced his sector rating on solar to Neutral. Shah says the Q2 weakness …

Doubts raised over India's plans for solar power – Last News from …

SciDev.Net: A leading Indian environmentalist and advisor on climate change has expressed doubts over whether India can fund its ambitious plans for solar power. Sunita Narain, director of the Delhi-based nongovernmental organisation …

glowing solar led lamp: looks like a ufo landed in your living …

While I’ve been waiting a really long time for the Alien Abduction Lamp to finally get mass-produced, I guess I’ll have to settle for this glowing green orb lamp from Japan for now.

What to Do to Earth Day Celebrate?

There are definitely countless reasons why people should be celebrating Earth Day. One very important reason might be the mere fact that the world has still continued to exist despite the many challenges that it is experiencing nowadays. Perhaps each individual should find that gratitude in their hearts so that they would be able to realize that the world needs all of us. Nonetheless, there must be a lot of individuals around the world who have found that gratitude in their hearts because there a lot of people getting involved in the Earth Day celebration. This celebration has already been observed globally regardless of race, religion, or status. This only shows that individual difference can be set aside to pursue a common goal- and that is environmental preservation.

Various activities and programs have been prepared for the Earth Day celebration. However, it cannot be denied that most people are busy with their own daily activities such that they wouldn’t find time to participate in actual celebrations. In order to address this concern, if people couldn’t make it to the celebration, the celebration is brought to them instead. This can be done through the advances in communication and information. Numerous Earth Day activities are made available through the worldwide web. These activities are made available for anyone to participate in at any time that they would prefer to. One of these activities is the Earth Day games which are specifically designed to incorporate environmental awareness into the games. Another activity is the various Earth Day crafts, which are craft lessons and procedures that make use of environmentally friendly materials. Earth Day coloring pages are another of the different activities which encourage the development of the art skills of an individual through the application of colors into different figures or illustrations. There are also different Earth Day songs and poems that one can download from the web. For individuals who are fund of social networking, there are Earth Day graphics that can be used as personal greetings or frontpages of personal profiles. Finally, there are Earth Day recipes that can be found in the web which are actually healthy yet savvy as well.

Surely, the possibilities of enjoying and celebrating Earth Day are countless. What is important is that the message is taken across every individual even for just this one special day in a year. It provides information and awareness in ways that could easily be grasped by any individual, all for the purpose of preserving mother Earth.

Axel Meierhoefer is a published author, educator, coach, consultant, and the founder of AMC LLC. His motto is” Helping others help themselves achieve success”. You want to learn how to achieve success faster, realize your goals, learn how to reach your dreams, then take actions. Come visit us at http://www.ecoconsciouspioneers.com or send an email to AM@Meierhoefer.net Don’t delay!

Solar magnetic loops, oblateness and gravitational pull – Bad …

Hi, http://trace.lmsal.com/POD/images/T1…809_230034.gif I’ve searched the forum for the answer, but have either missed it, or it isn’t there… Has.

Solar Data Logger with Silicon Pyranometer

Determining the amount of solar power from the available sunlight at a location is the main purpose of the project where the cumulative incident solar energy received during the deployment is being recorded.

The Costs of Solar Power Systems | Mindzle – Living Green Smart …

Solar energy will pay for itself once you have set up the system but the problem is the initial cost to the consumer to get the system going. For a business,

BP Solar To Begin Work On Nation's Largest Rooftop Solar Project …

BP Solar will begin work next month on what FedEx (FDX) is calling the largest rooftop solar project in the country, spanning 3.3 acres and 12400 solar.

Tech Trader Daily – Barron's Online : FSLR, ESLR Q2 Diverge; First …

Two prominent solar power technology providers are diverging in after-hours trading this evening, with First Solar (FSLR) rising about $3.70, or 2%, to $177.25, and Evergreen Solar (ESLR) falling 26 cents, or 11%, to $2.12 after the two …

Farmers market with Chef Carlin

With Natural Finishes Go Green

Finishes are coatings that are  applied to the external and inside surfaces of walls to protect them from the elements and from wear and tear.  They also improve the appearance of the structure and are used to enhance the design of rooms.

Petroleum, our main source of oil-based wood finishes and paint, is a non-renewable resource.  There are now paints and finishes on the market that are derived from a renewable resource, which  in a small way, helps to reduce dependence on oil, and  contributes to a more sustainable world.

The basis for these products is whey, which is a product of cheese making, and which has a high biochemical oxygen demand (BOD).  This increases the burden on waste treatment facilities, and can also pollute our natural water sources.  In the last ten years, this by-product has been used for many new purposes, one of which is natural wood finishes.

When choosing paints for your decorating, use the low or no VOC (volatile organic compound) paints. For hundreds, no, thousands of years, earth, clay and lime have been used, both in hot and cold areas of the world.  And now this knowledge is being readapted for contemporary use. If you do any redecorating or new building, it makes sense to contribute to having green, healthy surroundings.

Low and no VOC paints have less smell and less impact on air quality.  EPA studies have shown that indoor air quality is up to five times more toxic than outdoors, mainly because of toxic emissions from paint and finishes. This particularly affects anyone with allergies, asthma, or chemical sensitivities. With the new “green” paints, there will be lower contamination of landfills, groundwater, and the ozone.

Switching will not cost you more.  Cleanup is easily done with soap and water, instead of toxic chemicals, and brushes can easily be cleaned and reused.  The paint is still washable, and is far less harmful to you, your pets, and the environment.

Lisa is a freelance writer with a specialty in Internet content and SEO articles. She has written thousands of articles, hundreds of ebooks and thousands of website pages and related content. She has also authored her own books and works as a consultant to other writers, Internet marketers and Internet businesses.

Professional wordsmith for hire: gamer, wife, mother, entrepreneur, published poet, co-owner of game guides company (http://www.liti4.com), public speaker and Internet business consultant. You can learn more or follow Lisa’s blog from her website: http://www.freelancewriter4hire.com

Believe Me The Honey Bee Crisis is Bad!

“My Oh My” this is getting serious. What is happening to our honey bees? We have been starting to see the actual effects of the honey bee decline after placing our last order for bulk beeswax. As a manufacturer of natural beeswax lip balms and candles we have always been getting our beeswax here in our home state of Florida and last month was the first time we had to order from outside the sunshine state. Is this due to the rapid decline in honey bees or are we just worrying too much? Well facts are facts and we have some serious problems with the honey bee decline. Why are the bee colonies down as much as 60% we ask? Well it does seem that bees and humans may have something in common. Nutrition is as vital to us as it may be to the honey bees and it is possible that the bees are undernourished which may be the cause of the problem. Many states are seeing less dense bee hives and this may be contributed to the lack of nutrition the bees are getting.

Another possible cause of the honey bee crisis may be the pesticides that are being used. Many hives die as a result of “pesticide poisoning”. There are literally billions of honey bees dying prematurely and the source must be found before this world suffers severely. The honey bee only has a six week life cycle in the summer, three weeks inside the hive and three weeks outside, but many are not even making it to the fourth week.

So yet another possible source of this dilemma is the huge rise in cell phone stations and also cell phone use. Some are claiming the huge growth of clogged air waves with cellular waves may be disturbing the bees and causing the early deaths. Stephen C. Sharp who has been studying this problem for many weeks while not a scientist gives no personal merit to this cause. He states “Cellular phones have been around for long enough to see a potential problem with the bees. This problem came like a train wreck. I think there would have been many initial signs if the cellular wavebands were the source of the bee problem.”.

Other topics that have been thrown around as to the potential source of the bee crisis has been a virus or possibly mites that have worked their way into the bee colonies. Whatever the cause it must be isolated and controlled. Bottom line is if the bees all die maybe we will too! Bees are the only source to carry pollen of various fruits and nuts. Many plants do not reap the benefits of wind travel for pollination therefore if the bees vanish so does much of our food supply. We would begin to see a decline in new plants, brush, flowers, crops, and more. The honey bee gets food such as nectar and pollen from flowers and in turn pollinates the flower which allows the plant to reproduce. No bees, no reproduction!

Sincerely,

Stephen C. Sharp

Port Orange, Florida

On sale at wholesale prices buy over 1200 premium organic certified herbs, spices, roots, leafs, barks, and more. Visit us online at http://www.SharpWebLabs.com today. Florida Herb House is centrally located in Port Orange, Florida and specializes in retail and wholesale distribution of herbs, gourmet culinary spices, natural seaweed, essential oils, organic coffee, herbal tinctures, organic mushrooms and powders, liquid ionic minerals, beeswax candles and lip balms, and much more.

Green Technology

First Solar Reports Strong Results, But Remains Cautious

Following months of bearish stories about the prospects for thin-film solar, First Solar (s fslr) delivered the kind of results …

Environment » Blog Archive » A rocket man's view of solar energy …

Within months Caldwell had landed work on a solar power development project, recruited by an old buddy from his days launching model rockets in the desert. Perhaps more ironic is the company he ended up working for â?? Boeing Co. …

Boulder, Colorado, fraternity goes solar – TECH.BLORGE.com

Boulder, Colorado, fraternity goes solar Fraternity houses are not know for being eco-conscious. Most fraternities are known for their partying and campus irreverence than for any sort of environmental conscience. …

Rusnano invests in manufacture of solar batteries for spacecrafts

To date, Russia does not manufacture its own multi-junction solar cells based on gallium arsenide. At the same time, state policy for space industry development stipulates that solar batteries for Russian spacecrafts should be …

Clark Energy Inks Deal for Largest DoD Solar Project …

The US Army Corps of Engineers has selected Clark Energy Group, an affiliate of Clark Realty Capital, to develop the largest solar power project in the Department of Defense (DoD) at Fort Irwin, California.